Breakout Board for MAX7456 On Screen Display

Product Description

Description: This is a breakout board for the Maxim MAX7456  monochrome on-screen display chip. The board is set up with all supporting circuitry and RCA connectors to allow the user to easily interrupt and overlay text and/or graphics onto a video signal (PAL or NTSC). Just plug in your video signal to "Video In", plug your TV into "Video Out", connect a microcontroller to the SPI interface and supply the board with 5V@100mA (worst case) and you're good to go. Supplied sample code runs on an ATMega168/328 (16MHz) and compiles with WinAVR, so it's just about "plug-and-play" with an Arduino board.



Features:

• 
  Input voltage 5V


• 
  Current consumption 100mA, worst case


• 
  5V SPI interface

Dimensions: 1.8x0.9"

Weight: 0.30 ounces, 8.6 grams



Documents:

• 
  Datasheet


• 
  Schematic


• 
  Sample Code