Bluetooth DIP Module - Rayson BTM-182

Product Description

Replacement: WRL-10253. The RN-42 module is not a direct replacement, however it is a suitable substitute for most applications. This page is for reference only.

Description: Here is a simple breakout board for the Rayson BTM-182. It is an easy to use Bluetooth SPP (Serial Port Protocol) module, designed for transparent wireless serial connection setup. This is a fully qualified Bluetooth V2.0+EDR (Enhanced Data Rate) 3Mbps modulation with complete 2.4GHz radio transceiver. It uses CSR Bluecore 04 external single chip Bluetooth system with CMOS technology and with AFH (Adaptive Frequency Hopping).  

The firmware for the BTM-182 is the same as for the BTM-112.

Features:

• 
  Class 2 module with PCB antenna


• 
  SPP firmware


• 
  Bluetooth standard Ver. 2.0 + EDR compliant.


• 
  Low current consumption


• 
  Hold, Sniff, Park, Deep sleep modes


• 
  3.0V or 1.8V operation


• 
  Support for up to seven slaves : SCO links <3>, ACL links, Piconet <7>


• 
  Interface: USB, UART, and PCM (requires voice CODEC)


• 
  Support for 802.11 co-existence

Dimensions: 25.0 x 14.5 x 2.2 mm

Documents:

• 
  Schematic


• 
  Eagle Files


• 
  Module Datasheet


• 
  Command Set


• 
  BTM-112 Datasheet for reference only


• 
  Example Design for reference only