Development Platform for LPC2214

Product Description

Replacement: None. We do not have a direct replacement for this product. This page is for reference only.

Description: Feature-filled development board for the LPC2214 processor. Includes FTDI USB<->RS232 Interface, Ethernet, RS232, SRAM, Flash Memory, and much more!

• 
  MCU: LPC2214 16/32 bit ARM7TDMI with 256K Bytes Program Flash, 16K Bytes RAM, EXTERNAL MEMORY BUS, RTC,4x 10 bit ADC 2.44 uS, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation


• 
  Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG


• 
  Optional ETM connector (not installed)


• 
  1MB (256Kx32bit) 12 ns 71V416 SRAM


• 
  1MB (512Kx16bit) 55ns MX26LV800BTC FLASH


• 
  Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG


• 
  USB to RS232 converter, board can take power only from USB port


• 
  RESET circuit with external control of Philips ISP utility via USB-RS232 virtual port


• 
  Jumpers for boot select from external memory


• 
  Jumpers for ISP/RUN mode


• 
  Ethernet controller with CS8900A and RJ45 connector


• 
  LCD 16x2 with LED Backlight


• 
  2 Buttons


• 
  TrimPot connected to ADC


• 
  SPI connector


• 
  RS232 driver and connector


• 
  Dallas i-BUTTON interface and connector


• 
  I2C 24LC515 EEPROM on board


• 
  Two on board voltage regulators 1.8V and 3.3V with up to 800mA current

Dimensions: 3.9x6.7" (100x170mm)



Documents: LPC-E2214 Schematic



Software: Test Routines