LED Cube 3x3x3

Product Description

Replacement: KIT-09867. The new version has an Arduino serial bootloader programmed onto the ATmega328.

Description: This is a kit for a 3x3x3 cube of RGB LEDs. This kit contains everything you'll need - 27 LEDs, an ATmega168 microcontroller, custom PCB and other supporting components.



The included PCB breaks out the ISP header and the USART pins of the ATmega168; so you can customize the code and control it with a serial device. Sample code comes pre-programmed on the ATmega168.



Power should be provided by a clean +5VDC source. A 2.1mm barrel jack connector is included, but the power supply is not.



You'll need a soldering iron to put this together. All components are through-hole, but the LED matrix is a little difficult to assemble. Make sure you thoroughly read through the build instructions!



Kit Includes:

• 
  1x Atmega168 (pre-programmed)


• 
  1x 4 0.1” header (optional)


• 
  1x M74HC238


• 
  1x 3x3x3 cube PCB V04


• 
  27x RGB LED (common cathode)


• 
  2x 12” straight wires


• 
  2x 22pf capacitors


• 
  9x 1K ohm resistors


• 
  1x 20MHz crystal


• 
  3x 169 ohm resistors


• 
  1x 2.1mm DC jack


• 
  3x 200 ohm resistors


• 
  9x NPN transistors


• 
  3x 100 ohm resistors


• 
  2x3 0.1” header (optional)

Documents:

• 
  Build Instructions


• 
  Schematic


• 
  Source Code


• 
  See the LED Cube in action (YouTube)