Welcome to the Raspberry Pi Pico W, a microcontroller board built on silicon designed by Raspberry Pi now with wireless capabilities and supporting a C/C++ SDK or the official MicroPython port.

Features:
- RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
- Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
- On-board single-band 2.4GHz wireless interfaces (802.11n)
- 264KB of SRAM, and 2MB of on-board Flash memory
- Castellated module allows soldering direct to carrier boards
- USB 1.1 with device and host support
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels

Pico W Board Only	CanaKit Pico W Basic Kit	CanaKit Pico W Starter Kit
Raspberry Pi Pico W (Wireless)	Raspberry Pi Pico W (Wireless) Large 830 Hole Breadboard MicroUSB to USB-A Cable Set of two 20-pin Headers	Raspberry Pi Pico W (Wireless) Large 830 Hole Breadboard MicroUSB to USB-A Cable Set of two 20-pin Headers 32 x Jumper Wires RGB LED 2 x Red LEDs 2 x Green LEDs 2 x Yellow LEDs 2 x Blue LEDs 2 x Push Button Switches 10 x 220 Ohm Resistors 5 x 10K Ohm Resistors